Photos Canadian Armoured MG Carrier CSM 1/35

[Milan Mynar]

A few days ago I bought this model. It is a model of the interesting armoured vehicle. Models made by CSM are not only interesting, but easy to building.

 

[Bombardier]

Let us see it when you have built the beast

 

[Milan Mynar]

Here is small progress.

 

[Milan Mynar]

I started painting proces. In the first tme, I used Mr. Surfacer 1500 grey. After it dried, I used Khaki Green No. 3 from Hataka paint set. I mixed this color with four drops of trafic yellow, from the same producer. To get a little bit lighter tone of this color.

 

[Milan Mynar]

Today,I progressed a bit, I decently indicated the abrasion of the wooden parts of the internal structure. I glued some parts and prepared other parts for painting.

 

[Milan Mynar]

I am slowly continuing to paint the exterior of the model. Based on Mr. I sprayed Surfacer 1500, then I sprayed HATAKA dark green No. 4, which I then brightened by adding yellow. I sprayed the centers of large fields with this paint to optically break their uniformity.

 

[Milan Mynar]

Today I added some details, then painted them a little. And sprayed model with glossy varnish, as a base under the decals.

 

[Milan Mynar]

Today I applied decals and painted some details of machine guns.

 

[Milan Mynar]

I sprayed model with matt varnish. I also used a red filter spray to give the colors a brown tinge.

 

[Milan Mynar]

Today I tried to create a dusty surface with pigments.

 

[NebrHogger]

Excellent results!

 

[Milan Mynar]

I started making a base under the model. The basis is currently hardened styrene and paper.

 

[Milan Mynar]

I continued to work on the pad under the model. I glued the foliage and created, something like a dirt road, using a mixture of sifted soil and glue.